Minka-group F513-ORB User Manual

CERTIFICATE

4 HANGING THE FANWARNING: All of the parts, hardware and components such as the hanger bracket and hanger ball have been provided for your safety

Fig. 10REGISTRATIONSLOTFig. 8DOWNRODSUPPLYWIRESFig. 7CROSS PINHANGERBALLDOWNRODSET SCREWFig. 6HITCHPINLOCKPINSET SCREWSFig. 5OUTLET BOXHANGER BRACKET

5ELECTRICAL CONNECTIONS WARNING:To avoid possible electrical shock be sure electricity is turned off at the main fuse or breaker box

Step 3.Receiver to House Supply Wires Electrical connections:Connect the WHITE wire(Neutral) from the outlet box to the WHITE wire marked”AC in N” fro

Fig. 13WHITE (NEUTRAL)WHITE (NEUTRAL)GREEN OR BARECOPPER (GROUND)WHITE ( AC IN N )" "WHITE ( TO MOTOR N )" "GROUND-(GREEN)(CONNEC

6 FINISHING THE INSTALLATIONStep1.Remove the two screws from the hanger bracket.Step2.Slide the canopy up to the ceiling, then secure the two screws p

7BLADE INSTALLATIONTHE FOLLOWING OPERATION MUST BE ACCOMPLISHED BEFORE INSTALLING THE GLASS SHADE. Step 1.Attach the fan blade to the blade holder usi

8INSTALLING THE SWITCH BOX PLATE&SWITCH CUPStep1.Remove 1of 3screws from the mounting ring and loosen the other 2 screws.(Do not remove.) (Fig.17)

OPERATING THE REMOTE CONTROL/WALL CONTROL Remote Control only:Install a A23,12 Volt battery(included.)To prevent damage to transmitter remove the ba

speed settings for warm or cold weather depend on factors such as room size, ceiling height and number of fans.NOTE : Wait for fan to stop before

This product is protected by United States and/or State Law,including Patent, Trademark and/or Copyright laws.Manual design is protected by United Sta

10 CARE OF YOUR FAN Here are some suggestions to help maintain your fan. 1.Because of the fan’s natural movement some connection

11TROUBLESHOOTINGSYMPTOM Fan will not startSOLUTION Check to make sure the wall switch is turned on. Check circult fuses or breakers. C

SYMPTOMFan WobbleSOLUTION NOTE:All blade sets are grouped by weight. Because wood and plastic blades vary in density, the fan may wobble even t

1212SPECIFICATIONSThese are typical readings. Your actual fan may vary.They do not include amps and wattage used by the light (s). RFor any additional

1991.494214.186132.4211.8035.1069.90168.77116.7487.73

R Minka-Aire warrants to the original owner that this fan will be free from defects in material and workmanship for one year R from the date of

This warranty shall not apply to fans which have been damaged in any way, including improper installation, damage as result of the removalof the f

BLADE INSTALLATION 7INSTALLING THE SWITCH BOX PLATE&SWITCH CAP

SAFETY RULES1 1. 2. Be cautious!Read all instuctions and safety information before installing your new fan. Review accompanying assembly di

NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occ

PACKAGE CONTENTS1. Fan blades(4) 2. Hanger bracket3. Canopy4. Canopy cover5. Coupling cover6. Standard downrod assembly(6") Mi

3INSTALLING THE FANMOUNTING OPTIONSIf there isn't an existing mounting box, then read the following instructions. Disconnect the power by removin